How to reduce vibrating noise from Electrolux ELFW7537AW Washer?
To stop vibrating noise from your Electrolux Washer, make sure the washer is resting firmly on the floor and adjust the leveling legs as needed. Consult the Installation sections of the manual for instructions on removing shipping bolts and the foam block, if these haven't been removed already. If the wash load is unevenly distributed, stop the washer and rearrange the load.
What to do if water is entering Electrolux ELFW7537AW Washer but tub does not fill?
To address the issue of water entering the Electrolux Washer but the tub not filling, increase the standpipe height to at least 23.6” (60 cm).
How to get rid of lint on clothes from my Electrolux ELFW7537AW Washer?
To address lint issues with your Electrolux Washer: * Ensure correct sorting of clothes and reduce the load size. * Rewash using the correct water temperature, water level, and amount of detergent. * If tissues were left in a pocket, add a non-precipitating water conditioner to remove detergent residue. * For overloaded washers, add liquid fabric softener to the final rinse. * If undissolved detergent has left a residue, remove the lint with a lint brush or roller.
General| Style | front load |
|---|---|
| Color | white; yes |
| Washer Capacity | 4.5 cu. ft. |
| Max Spin Speed | 1, 300 rpm |
| Number of Cycles | 10 |
| Temperature Settings | 5 |
| Internal Heater | yes |
| Control Panel | digital and knobs |
| Delay Start / End | yes; 1-12 hours |
| Child Lock | yes |
| Interior Light | yes |
| Steam | yes |
| Add Wash | no |
| Soak Settings | no |
| Remote Control | no |
| Wi-Fi | no |
| Annual Energy Consumption | 85 kwh |
| Annual Water Consumption | 4, 248 gallons |
| Voltage | 120 volts |
| Current | 15 |
Weight and Dimensions| Depth | 32 inch |
|---|---|
| Height | 38 inch |
| Width | 27 inch |
| Net Weight | 217 lbs |
Safety terms (Danger, Warning, Caution, Important) and general safety advice.
Protect children and safely dispose of old appliances.
Warnings on mixing chemicals and preventing injury during operation.
Prevent shock and injury, including grounding requirements.
Checklist for shipping hardware, leveling, water, drain, door, electrical, and tools.
Specific requirements for proper grounding and water supply connections.
Recommended clearances for alcoves, recesses, closets, and installation areas.
Circuit, power supply, and outlet requirements for safe installation.
Specifications for drain hose, standpipe diameter, and height.
Steps for unpacking, including safety precautions and handling instructions.
Instructions and diagrams for removing shipping bolts, spacers, and hardware.
Steps and tips for properly leveling the washer for stability and performance.
Procedure for ensuring the drain hose is correctly connected and secured.
Instructions for connecting hot and cold water hoses, including checks and tightening.
Final steps: plugging in, checking operation, and storing instructions.
Table detailing temperature, soil, spin, and option settings for 300 series cycles.
Table detailing temperature, soil, spin, and option settings for 400 series cycles.
Table detailing temperature, soil, spin, and option settings for 500 series cycles.
Troubleshooting common issues related to soil, stain removal, and lint.
Diagnosing and resolving issues related to unusual noises and vibration.
Resolving issues where the washer does not start, or water does not enter or drains slowly.
Addressing problems with water temperature, leaks, oversudsing, and incorrect connections.
To Next Page