Getting started
5
1.
-
face
drinkable and non sparkling water.
(The machine must not be used with
empty tank!) Plug the power cord
into the mains and press the ON
button. The machine is ready to use
when the cup indicator lights stop
and become steady.
2. When starting the machine for
Place a glass under
pressing the Espresso Lungo but-
ton. Run also the Latte function
one time by pressing the Latte
button with water in the milk glass.
3. The machine must not be used
with empty tank!
coming out during brewing try to
prime it. To prime the circuit, run
the Latte function one time by
pressing the Latte button with
water in the milk glass. Once this
is complete, place a glass under
the coee spout and run also the
fresh water through the coee
spout by pressing the Espresso
Lungo button.
EN
EN
To Next Page
Loading...
