electrolux installation
46
Connecting the appliance to
the power supply
• The electrical outlet should be
readily accessible so that the
unit can be unplugged easily in
an emergency.
• The socket should not be
positioned behind the cupboard.
• The best position is above the
cupboard, see (A). When not
connecting the power supply cord
to position (A) it should be removed
from the support clip (see diagram,
item 14, page 9) and routed under
the oven.
• Connect the appliance to a single
phase 230 V/50 Hz alternating
current via a correctly installed
earth socket. The socket must be
fused with a 16 A fuse.
• The power supply cord may
only be replaced by an
electrician.
• Before installing, tie a piece of
string to the power supply cord to
facilitate connection to point (A)
when the appliance is being
installed.
• When inserting the appliance into
the high-sided cupboard, DO NOT
crush the power supply cord.
• Do not immerse the power supply
cord or plug in water or any other
liquid.
(A)
Electrical connections
WARNING: THIS APPLIANCE
MUST BE EARTHED.
The manufacturer declines any
liability should this safety measure
not be observed.
If the plug that is fitted to your
appliance is not suitable for your
socket outlet, iyou must call your local
Electrolux service agent.
To Next Page
Loading...
