Heating function Application
Steam Regenerating
Food reheating with steam prevents surface drying. Heat is distributed in a gentle and
even way, which allows to recover taste and aroma of food as just prepared. This
function can be used to reheat food directly on a plate. You can reheat more than one
plate at the same time, using different shelf positions.
Bread Baking
Use this function to prepare bread and bread rolls with a very good professional-like
result in terms of crispiness, colour and crust gloss.
Dough Proving
To speed up the rising of the yeast dough. It prevents dough surface from drying and
keeps the dough elastic.
Full Steam
For steaming vegetables, side dishes, fish
Humidity High
The function is suitable for cooking delicate dishes like custards, flans, terrines and
fish.
Humidity Low
The function is suitable for meat, poultry, oven dishes and casseroles. Thanks to the
combination of steam and heat, meat gets a tender and juicy texture along with a
crusty surface.
6.5 Notes on: Moist Fan Baking
This function was used to comply with the
energy efficiency class and ecodesign
requirements (according to EU 65/2014 and
EU 66/2014). Tests according to: IEC/EN
60350-1.
The oven door should be closed during
cooking so that the function is not interrupted
and the oven operates with the highest
energy efficiency possible.
When you use this function the lamp
automatically turns off after 30 sec.
For the cooking instructions refer to "Hints
and tips" chapter, Moist Fan Baking. For
general energy saving recommendations
refer to "Energy Efficiency" chapter, Energy
Saving.
7. CLOCK FUNCTIONS
7.1 Clock functions description
Clock function Application
Cooking time To set the length of cooking. Maximum is 23 h 59 min.
End action To set what happens when the timer ends counting.
Delayed start To postpone the start and / or end of cooking.
ENGLISH 15
To Next Page
Loading...
Need help?
General
