Problem Possible cause Remedy
There is no good cooking
performance using the
function: True Fan Cooking
PLUS.
You did not fill the cavity
embossment with water.
Refer to "Activating the
function: True Fan Cooking
PLUS".
You want to activate the
True Fan Cooking PLUS
function, but the Plus
Steam indicator does not
switch on.
You did not select the
heating function that sup‐
port Plus Steam.
Refer to "Activating the
function: True Fan Cooking
PLUS".
You want to activate the
True Fan Cooking PLUS
function, but the Plus
Steam indicator does not
switch on.
The Plus Steam does not
work.
Deactivate the appliance
with the house fuse or the
safety switch in the fuse
box and activate it again.
Refer to "Activating the
function: True Fan Cooking
PLUS".
The water in the cavity em‐
bossment does not boil.
The temperature is too low. Set the temperature at
least to 110 °C.
Refer to "Hints and tips"
chapter.
The water comes out of
the cavity embossment.
There is too much water in
the cavity embossment.
Deactivate the oven and
make sure that the appli‐
ance is cold. Wipe the wa‐
ter with a cloth or sponge.
Add the correct amount of
water to the cavity em‐
bossment. Refer to the
specific procedure.
The display shows "12.00". There was a power cut. Reset the clock.
12.2 Service data
If you cannot find a solution to the
problem yourself, contact your dealer or
an Authorised Service Centre.
The necessary data for the service
centre is on the rating plate. The rating
plate is on the front frame of the oven
cavity. Do not remove the rating plate
from the oven cavity.
We recommend that you write the data here:
Model (MOD.) .........................................
Product number (PNC) .........................................
Serial number (S.N.) .........................................
ENGLISH 29
To Next Page
Loading...
