Step 2
- press repeatedly. - starts to flash.
Step 3
, - press to set the minutes. - press to confirm.
Step 4
, - press to set the hours. - press to confirm.
When the set time ends the signal sounds for 2 min. Time setting flashes in the display. The oven
turns off automatically.
Step 5 Press any button to stop the signal.
Step 6 Turn the knobs to the off position.
8.4 How to set function: End Time
Step 1 Set a heating function.
Step 2
- press repeatedly. - starts to flash.
Step 3
, - press to set the hour. - press to confirm.
Step 4
, - press to set the minutes. - press to confirm.
At the set end time the signal sounds for 2 min. The time setting flashes in the display. The oven
turns off automatically.
Step 5 Press any button to stop the signal.
Step 6 Turn the knobs to the off position.
8.5 How to set function: Time Delay
Step 1 Set a heating function.
Step 2
- press repeatedly. - starts to flash.
Step 3
, - press to set the minutes for the function: Duration. - press to confirm.
Step 4
, - press to set the hour for the function: Duration. - press to confirm.
- starts to flash.
Step 5
, - press to set the hour for the function: End Time. - press to confirm.
Step 6
, - press to set the minutes for the function: End Time. - press to confirm.
The display shows: the set temperature, , .
Oven turns on automatically later on, works for the set Duration time and stops at the set End Time.
At the set End Time the signal sounds for 2 min. The time setting flashes in the display. The oven turns off.
Step 7 Press any button to stop the signal.
Step 8 Turn the knobs to the off position.
ENGLISH 13
To Next Page
Loading...
