General instructions
• After a clock function has been selec-
ted, the corresponding symbol flash-
es for about 5 seconds. During this
time, the desired times can be set or
modified using the
or button.
• When the desired time has been set,
the symbol continues to flash for ap-
prox. 5 seconds. After this the symbol
lights up. The set Countdown
be-
gins to count down.
• The time set for Cook time
and End
time
begins to count down after
the selected function starts.
Countdown
1. Press the Clock Functions button
repeatedly until the symbol for
Countdown
flashes.
2. Using the or buttons, set the
desired countdown (max. 99.00 mi-
nutes).
After about 5 seconds the display shows
the time remaining. The symbol for
Countdown
lights up.
When the time set has elapsed, an
acoustic signal sounds for 2 minutes.
“0.00” lights up and the symbol for
Countdown
flashes.
To turn off the acoustic signal: Press any
button.
24 electrolux using the oven
To Next Page
Loading...
