EasyManua.ls Logo

Electrolux ERC925DSD - Care and Cleaning; Maintenance Safety Warning; Hood Cleaning Procedure; Grease Filter Maintenance

Electrolux ERC925DSD
44 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
8 electrolux.com.au
CARE AND CLEANING
WARNING
Switch off or unplug the appliance from the mains
supply before carrying out any maintenance work.
IMPORTANT
Clean the hood using a damp cloth and a neutral
liquid detergent.
Long Life Carbon Filter
The anti-odour filter can be washed and regenerated every
3-4 months (or more frequently if the hood is subject to
intensive use), up to a Max. of 8 regeneration cycles (in
case of particularly intensive use it is recommended that
you do not exceed 5 cycles).
Regeneration procedure:
Wash in the dishwasher at a Max temperature of 70ºC or
hand wash in hot water without using abrasive sponges
(do not use detergents!).
Dry in the oven at a Max temperature of 7C for 2 hours
or dry at room temperature, standing the filter in a vertical
position to facilitate drainage.
NOTE: Replacement carbon filters are available from
Electrolux spare parts.
Grease Filters
Clean or replace the filters continuously according to below
time intervals, to maintain good performance of the hood
and to prevent a potential fire hazard, caused by excessive
grease build-up. The grease filters must be cleaned every
2 months of operation, or more frequently for particularly
heavy usage, and can be washed in a dishwasher.
Replacing the lamps
For replacement, please contact an Authorised
Service Center.

Related product manuals