1010
EN
IND
KR
TH
VIET
CH
TW
A
B
Vacuuming with ERGORAPIDO® Before vacuuming, check that the nozzle
wheels and the brush roll are clean from sharp objects in order to avoid
scratching sensitive oors and to ensure full cleaning performance.
Start and stop ERGORAPIDO® by pushing the ON/OFF button A. ERGORAPIDO® has 2 power settings
which is regulated with button B. 1. ERGORAPIDO® will start on the high power mode. 2. For more silent
cleaning and longer runtime, press the B button one more time to activate the “Silent mode”.
The wall unit can also be mounted on a wall.
Separate it from the oor unit. Always ensure that
the wall can withstand the weight of ERGORAPIDO®.
APAC_ErgoIFU_BED_Master.indd 10 2016-05-31 11:09:45
To Next Page
Loading...
