Electrolux ESF 472 - Using the Controls; Programme Guide; ON;OFF Pushbutton; Water Temperature Pushbutton

USING THE CONTROLS
1. Programme Guide
This is a summary of the washing programme chart
to help you to select the correct programme.
2. ON/OFF Pushbutton ©
ON
By depressing this pushbutton the machine starts
operating and, at the same time, the pilot light illumi-
nates.
OFF
When the washing programme has finished, the
machine stops automatically and the pilot light (6)
remains on.
To switch the pilot light off or to stop the machine at
any time, press the same button ® again.
3. Water Temperature Pushbutton 55°
This pushbutton allows selection of the required
water temperature.
When depressed the water will heat up to 55°C.
By depressing the pushbutton again the water will
heat up to 65°C.
4. Economy Drying Pushbutton fi
By pressing this button you can reduce the last rinse
temperature from 65°C to 55°C. In this case the
dishes will have a less shiny finish.
5. Door Handle
To open the door press the catch in the top of the
recess and pull the door toward you at the same
time.
6. Pilot Light
This comes on when the ON/OFF button © (2) is
depressed, indicating that the machine is on.
32
7. Programme Selector Dial
To select a programme, turn the Programme Selector
Dial clockwise, making sure that the programme
letter you wish to select corresponds with the Grey
Marker @ (9).
When the programme has finished, the Grey Marker
on the Programme Selector Dial corresponds with the
Grey Marker (9).
8. Wash Programme Phase Indicator
During the washing programme the Programme
Selector Dial turns. The Grey Marker @ (9) will corre-
spond to a symbol on the fascia indicating the func-
tion being performed.
Prewash
Main wash
Cold rinse
Warm rinse
J Hot air drying
z® Quick wash
=
0. Salt Refill Indicator Light &:
This fight will illuminate when the salt container needs
refilling.