Electrolux ESF 472 - Electrical Connection; Electric Cable Replacement

The Electrical Connection
Before plugging the appliance into the wall socket,
make sure that:
1. the mains voltage corresponds to the voltage given
in the technical specifications;
2. the meter, fuses, mains power supply and wall
socket can all take the maximum load required.
Make sure that the socket and plug are compatible
without having to use any type of adapter. If neces-
sary, have the domestic wiring system socket
replaced.
Safety standards require the appliance to be
earthed.
The Manufacturer accepts no liability for failure to
observe the above safety precautions.
This appliance complies with the E.E.C. Directive No.
87/308 of 2.6.87 relative to radio interference
suppression.
Electric Cable Replacement
if necessary, the electric cable can be replaced.
Unplug the appliance.
The terminal board is located at the back of the appli-
ance and is easily accessible.
Depress with a screwdriver the two tongues of the
terminal board lid. Lift it: unscrew the screw fixing the
cable, unscrew the terminals and replace the cable.
29