EasyManua.ls Logo

Electrolux ESF 63025 - Water Softener Settings; Adjusting Water Hardness

Electrolux ESF 63025
40 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
If you want to use combi detergent
tablets ("3 in 1", "4 in 1", "5 in 1"
etc... ) follow the instructions given
in "Use of detergent".
Set the water softener
The dishwasher is equipped with a water
softener designed to remove minerals
and salts from the water supply, which
would have a detrimental or adverse ef-
fect on the operation of the appliance.
The higher the content of these minerals
and salts, the harder your water is. Water
hardness is measured in equivalent
scales, German degrees (°dH), French
degrees (°TH) and mmol/l (millimol per
litre - international unit for the hardness
of water).
The softener should be adjusted accord-
ing to the hardness of the water in your
area. Your local Water Authority can ad-
vise you on the hardness of the water in
your area.
The water softener must be set in
both ways: manually and
electronically.
Water hardness
Adjusting the water
hardness setting
Use of salt
°dH °TH mmol/l manually electronic
ally
51 - 70 91 - 125 9,1 - 12,5 2 level 10 yes
43 - 50 76 - 90 7,6 - 8,9 2 level 9 yes
37 - 42 65 - 75 6,51 - 7,5 2 level 8 yes
29 - 36 51 - 64 5,1 - 6,4 2 level 7 yes
23 - 28 40 - 50 4,0 - 5,0 2 level 6 yes
19 - 22 33 - 39 3,3 - 3,9 2 level 5 yes
15 - 18 26 - 32 2,61 - 3,2 1 level 4 yes
11 - 14 19 - 25 1,9 - 2,5 1 level 3 yes
4 - 10 7 - 18 0,71 - 1,8 1 level 2 yes
10 electrolux set the water softener

Related product manuals