5) Select the required programme
Turn the programme selector dial clockwise to the desired programme.
6) Start the machine
Before staring the machine check that:
• The appliance is plugged in
• The water supply taps are turned on
• The drain hose is correctly and securely positioned
• The door and the detergent dispenser drawer are closed
Depress the ON/OFF button
the mains light will illuminate and the
machine starts operating.
7) At the end of the programme
The machine stops automatically.
If you have depressed the RINSE HOLD button, the machine will stop with the water of the last rinse left in the
tub, to prevent the fabric from creasing. To drain the water and spin, release the same button. To drain only,
select programme “U”.
The door is controlled by a safety device which releases 2 minutes after the end of the programme.
Switch the machine off by depressing the ON/OFF button again. The mains-on light goes out.
To Next Page
Loading...
