Electrolux EW1200i - Wash & Dry Automatically; Add detergent and softener; Select wash & dry programme; Select wash & dry option

2) Measure out the detergent and fabric softener
Pull out the dispenser drawer until it stops.
Measure out the amount of detergent required and pour it into the main wash compartment. If required, pour
fabric softener into the compartment marked (the amount used must not exceed the “MAX” mark in the
drawer). Close the drawer gently.
3) Select the required programme
Turn the programme selector dial clockwise to programme K.
4) Select the required option
Depress QUICK WASH button, if required.
5) Select the required time
Turn the time selector dial clockwise to the required time.
6) Start the machine
Depress the ON/OFF button : the mains-on light comes on and the machine starts operating.
7) At the end of the programme
The machine stops automatically and the drying light goes out.
The door is controlled by a safety device which releases 2 minutes after the end of the programme.
Switch the machine off by depressing the ON/OFF button again, the mains-on light goes out.
If the laundry is still too damp, select a further brief drying time, bearing in mind that during the last 10 minutes
the appliance carries out a cooling and anticrease phase.
Washing programmes
Programmes for cotton and Linen
Wash
programme
Degree of
soil & type of
laundry
Prog.
position
Description
Possible
options
Max.
load
Cycle
time
(mins)
Whites with
pre wash
For heavy
soiled cotton
items
A
Pre wash at 40°C
Wash at 95°C
Long spin at 1200
rpm
4.5kg 150