• Selection of drying time in minutes.
After starting the programme, the remaining time is
updated every minute.
Important!
If you select a drying time longer then 55’
minutes, after 3 seconds, the display will show it
in hours and minutes (see the example below).
Example:
• Delay start, a time value indicated in hours (23
hours max) and selected by means of the relevant
button.
The delay time is displayed for 3 seconds, then the
duration of the selected programme reappears.
After you have pressed the Start/Pause button, the
countdown is updated every hour, and, for the last
two hours, every 30 minutes.
• An incorrect option selection has been made:
this is indicated by the message Err when a
function incompatible with the current programme
is selected.
• An alarm code indicates a fault in the machine
operation (see the relevant chapter, "Something
Not Working")
11 Programme phase indicator
lights
When you select a programme, the lights relevant to
the phases that form the programme light up.
After you have started the programme, only the light
relevant to the phase that is currently being carried
out will remain lit.
To Next Page
Loading...
