Why Electrolux EWF12832 is making an unusual noise?
If your Electrolux washer is making an unusual noise, make sure the levelling of the appliance is correct. Make sure that the packaging and/or the transit bolts are removed. Add more laundry in the drum if the load may be too small.
How to open Electrolux Washer door if it won't open?
If the door of your Electrolux washer won't open, wait until the end of the washing cycle or about 5 minutes for the door lock to release. If there is still water in the drum, select the ‘Spin’ program to empty it out.
Why is my Electrolux EWF12832 vibrating or noisy?
If your Electrolux washer vibrates or is noisy, ensure that the transit bolts and packing have been removed and that the support feet have been properly adjusted to level the appliance. Pause the machine and redistribute laundry manually if it's not evenly distributed in the drum. If there is very little laundry in the drum, load more laundry. Reduce the detergent quantity or use another one if there is detergent over dose.
What to do if there is water on the floor near Electrolux Washer?
If there is water on the floor, it could be due to using too much or unsuitable detergent, which creates excessive foam. Try reducing the amount of detergent or switching to a different one. Also, check the water inlet hose connection for any leaks and replace the drain hose if it's damaged.
Why Electrolux EWF12832 vibrates or is noisy?
If your Electrolux Washer vibrates or is noisy, it could be due to several reasons. The transit bolts and packing may not have been removed (check the correct installation of the appliance), the support feet may not have been adjusted (check the correct leveling of the appliance), the laundry might not be evenly distributed in the drum (pause the machine and redistribute laundry manually), there might be very little laundry in the drum (load more laundry), or there could be detergent overdose (reduce the detergent quantity or use another one).
What to do if my Electrolux EWF12832 is not filling with water?
If your Electrolux Washer isn't filling with water, the possible causes are: the water tap is closed (open the water tap), the inlet hose is squashed or kinked (check the inlet hose connection), the filter in the inlet hose is blocked (clean the water inlet hose filter), or the door is not properly closed (close the door firmly).
Why Electrolux EWF12832 Washer does not start?
Your Electrolux Washer might not start due to several reasons: the door might not be completely closed, the plug might not be properly inserted into the power socket, there might be no power at the socket, the Start/Pause button might not have been pressed, or the delay start function may have been activated. Ensure the door is firmly closed, the plug is correctly inserted, there is power, the Start/Pause button is pressed, or cancel the delay start if you want to wash immediately.
Why is my Electrolux EWF12832 Washer not filling with water?
If your Electrolux washer isn't filling with water, ensure the water tap is fully open and the inlet hose isn't squashed or kinked. Also, check and clean the water inlet hose filter if it's blocked, and make sure the door is properly closed.
General safety precautions and warnings for using the appliance safely.
Safety considerations related to installing the washing machine.
Safety guidelines for operating the washing machine.
Precautions to ensure the safety of children around the appliance.
Explanation of the child lock feature to prevent accidental door locking.
Comprehensive guide to available wash programs and their selectable options.
Step-by-step guide to initiating a wash program.
Instructions for connecting water inlet, drain, and electrical power.
General| Capacity | 8 kg |
|---|---|
| Spin Speed | 1200 RPM |
| Energy Efficiency | A+++ |
| Type | Freestanding |
| Water Consumption | 52 L |
| Loading type | Front |
| Programs | Cotton, Synthetics, Delicates, Wool, Quick Wash |
| Dimensions | 60 cm x 60 cm x 85 cm |
To Next Page