Electrolux EWM09312 - E92 Protocol Incongruence; E93 Appliance Configuration Error; E94 Washing Cycle Configuration Error; E97 Control Selector;Data Inconsistency

Technical Support - A.D.L. 60/70 599 74 23-12 Rev.00
E92
E92: protocol incongruence
E92
Inconsistency between configuration values on starting the appliance
E93
E93: Appliance configuration error
E93
Inconsistency between configuration values on starting the appliance
E94
E94: Incorrect configuration of washing cycle
E94
Inconsistency between configuration values on starting the appliance
E97
E97: Inconsistency between control selector version and
configuration data
E97
Discrepancy between programme configuration data and selector recognition data
E9C
E9C: Display board configuration error
E9C
Incorrect configuration possible.
Replace the circuit board and repeat the diagnostic cycle to check for any further alarms.
Check that all the connectors are correctly inserted
!
Incorrect configuration possible.
Replace the circuit board and repeat the diagnostic cycle to check for any further alarms.
Check that all the connectors are correctly inserted
!
Incorrect configuration possible.
Replace the circuit board and repeat the diagnostic cycle to check for any further alarms.
Check that all the connectors are correctly inserted
!
Incorrect configuration possible.
Replace the circuit board and repeat the diagnostic cycle to check for any further alarms.
Check that all the connectors are correctly inserted
!
Incorrect configuration possible.
Replace the circuit board and repeat the diagnostic cycle to check for any further alarms.
Check that all the connectors are correctly inserted
!