- 9 -
6. Select the temperature
Choose the temperature which corresponds to the
chosen programme.
7. Select the spinning speed
Choose the spinning speed suiting best to the nature of
your laundry and to the degree of humidity wished at
the end of the wash.
Here are the spinning speeds according to the nature
of the laundry :
8. Select the programme
Choose the programme according to the nature and
the degree of soil of the laundry.
Turn the programme selector clockwise to select the
chosen programme.
9. Starting of the programme
The ON/OFF pushbutton " " enables to switch on
your machine. The control lamp illuminates and the
programme begins.
10. At the end of the programme
When the selected programme is over, the machine
stops automatically. The timer knob stops on a stop
position "I" for all the programmes.
If the rinse hold pushbutton "
" is selected, the chosen
programme end by a rinse hold. You can finish this
programme by a spinning by depressing the rinse hold
pushbutton "
" or by a drain (programme P). Depress
the on/off pushbutton "
" before doing your choice.
After each wash, depress the on/off pushbutton.
Press off the pushbuttons if necessary ; unplug the
machine from the wall socket ; turn off the water tap.
We advise you to leave the drum and the lid open in
order to air the washing machine.
nottoC
1301TWE0030040050560080090001
139TWE003004005006007008009
.htnyS
looW
ehtroF
owt
sledom
003-054-056- 058
.leD003-004-055- 056
To Next Page
Loading...
