CONTROL PANEL3.
8
www.electrolux.com
Turn the Program Selector knob to
choose the wash program you
want. The table “Your Program
Guide” shown on page 12 will help
you in selecting the right program.
The Program Selector knob is not a
timer. Once you select a wash
program, the Program Selector
knob will stay at that position for
the whole wash cycle.
3.1
PROGRAM SELECTOR
KNOB
NOTE:
Flood diagnostic is explained
on page 27. You should refer
to this if you have water
pouring onto the floorThe
display will show “ ” and
you will hear rapid short
beep continuously to remind
you about this problem.
Choose the water level by pressing
Water Level button. Use only the
amount of water you need for the
wash load.
* Maximum mass of dry cloth is
8.5 kg
3.2
WATER LEVEL BUTTON
When you choose the Wool and
Bedding program, the Deep Rinse
option is automatically selected for
you. You will NOT be able to select
and use Eco Rinse with these two
programs.
Water
Level
Water level
description
Clothes
Load (kg)
6 to 8.5
4 to 6
2 to 4
0 to 2
Full
The machine will
fill the Full
amount of water
for your FULL
load.
Medium
The machine will
fill the medium
amount of water
for your HALF
load.
High
The machine will
fill the High
amount of water
for your NEARLY
FULL load.
Low
The machine will
fill the Low
amount of water
for your SMALL
load.
3.1 3.2 3.3 3.4 3.6
3.73.5