EasyManuals Logo

Electrolux EXP35U538CW User Manual

Electrolux EXP35U538CW
152 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #17 background imageLoading...
Page #17 background image
17
ENGLISH
Plug in the unit, then press the “on/o󰘯”
button (when turned on, the unit will operate
as the last setting before shutdown.
To switch the unit o󰘯, press “on/o󰘯”
button again, then remove the plug.
Always switch the unit o󰘯 by pressing the
“on/o󰘯” button and wait for few minutes
before removing the plug.
Press the “mode” button until the left side
of LCD screen displays “cool”.
Press the “fan speed” button to choose the
fan speed “auto”, “high”, “mid”, and “low”.
Press the “
” and “ ” button to choose
the temperature you want.
Press the “mode” button until the left side
of LCD screen displays “dry”.
At the same time, the “low” fan symbol
appears on the screen.
Note: In this mode, fan speed cannot
be selected.
Press the “mode” button until the left side
of LCD screen displays “heat”.
Press the “fan speed” button to choose the
fan speed “auto”, “high”, “mid”, and “low”.
Press the “
” and “ ” button to choose
the temperature you want.
Press the “mode” button until the upper
side of LCD screen displays “auto”.
Under AUTO mode, you can not select
the fan speed.
Press the “
” and “ ” button to choose
the temperature you want.
When the unit is in Cool, Heat or auto
mode, you can press the “sleep” button
to make the unit run in Sleep mode. In this
mode, the fan speed will be set as “auto”
automatically, which cannot be changed.
In Cool/Heat mode the selected
temperature will increase/decrease
by 1°C 30 minutes after the mode is
selected. The temperature will then
increase/decrease by another 1°C after
an additional 30 minutes. This new
temperature will be maintained for 7 hours
before it returns to the originally selected
temperature. This ends the “Sleep” mode
and the unit will shut down automatically.
Press the “mode” button until the left side
of LCD screen displays “fan”.
In this mode, you can select fan speed
“high”, “mid” or “low” by pressing the Fan
speed button and referring to the diagram.
Note: In this mode, the air exhaust hose
does not need to be connected.
Cool mode
Dry mode
Heat mode (For Heat & Cool models only)
AUTO mode
Sleep mode
Fan mode

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Electrolux EXP35U538CW and is the answer not in the manual?

Electrolux EXP35U538CW Specifications

General IconGeneral
TypeMonobloc mobile air conditioner
TimerYes
Noise level64 dB
Cooling capacity (max)- BTU/h
Dehumidifying capacity1.6 l/h
Timer duration (maximum)24 h
Air conditioner functionsCooling
Heating capacity in watts (max)- W
Heating energy efficiency (COP, W/W)-
AC input voltage220 V
Energy efficiency class (cooling)A+
Hourly energy consumption (cooling)3.5 kWh
Product colorWhite
Weight and Dimensions IconWeight and Dimensions
Width- mm
Weight34000 g

Related product manuals