Electrolux EXP35U538CW User Manual

18
www.electrolux.com
The “Sleep” mode program can be
cancelled at any time during operation by
pressing the “Sleep”, “mode” or “fan speed”
button.
Note: In Fan or Dry mode, Sleep mode
cannot be set.
Press the “swing” button to enable louver
swing function, and the upper side of
screen will display “
”. The louver
on the top panel will swing up and down.
Press this button again to disable the
louver swing function.
Louver Swing Function
°F/°C function
Timer mode
Press the “
” and “ ” button the same
time for more than 3 seconds to switch
between degree Fahrenheit and degrees
Celsius. Under Dry/Fan mode, you can
not select °F/°C.
How to delay startup
Plug in the unit, so the unit turns to
standby. Press the “timer” button, the
screen will display “timer”and “h”, and
the “on” will 󰘱ashing.
Tap or hold the UP arrow “
” or the
DOWN arrow “
” to change delay start
timer at 0.5 hour increments up to
10 hours, then at 1 hour increments up to
24 hours. After 3 seconds, the setting will
be memorized. The control will count down
the time remaining until startup. You can
also press the “timer” button again directly
and the “on” will stop 󰘱ashing immediately,
then the unit will start up in the mode as
previously set.
You can set up the mode and the unit will
start up as you preferred after “on” stop
󰘱ashing.
To cancel the setting, press the “timer”
button again.

Electrolux EXP35U538CW Specifications

General

Type	Monobloc mobile air conditioner
Timer	Yes
Noise level	64 dB
Cooling capacity (max)	- BTU/h
Dehumidifying capacity	1.6 l/h
Timer duration (maximum)	24 h
Air conditioner functions	Cooling
Heating capacity in watts (max)	- W
Heating energy efficiency (COP, W/W)	-
AC input voltage	220 V
Energy efficiency class (cooling)	A+
Hourly energy consumption (cooling)	3.5 kWh
Product color	White

Weight and Dimensions

Width	- mm
Weight	34000 g