EasyManua.ls Logo

Electrolux Gas Range - Multi Stage

Electrolux Gas Range
52 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
33
Cooking Modes
MULTI STAGE
This feature enables you to perform sequential cooking at the touch of a button. Its purpose is to
program a queue of up to three cooking modes with individual cooking time and temperatures in
a sequence. This feature can be used with most cooking modes; Baking, Broiling, Convection
Baking, Convection Roasting, Convection Broiling, Keep Warm and Bread Proof. A Cook Time
can be programmed with your cooking mode and then queued. An auto-suggested set
temperature outputs in the display as a default value during the set temperature programming.
Any stage programmed with Broil or Convection Broil cannot last longer than 10 minutes. A proper
cook time and a set temperature are required for every stage programming. At least two stages
must be programmed before a Multi-Stage cooking operation starts. During stage 1 cooking the
electronic control provides temperature visual output in the display. During stage 2 and 3, the
electronic control displays the set temperature only.
To set a Multi Stage sequence (Timed Convection Bake, Timed Broil, Keep Warm):
1. Arrange interior oven racks and place food.
2. Select oven by pressing UPPER OVEN
UPPER
OVEN
.
3. Press MULTI STAGE .
Stage 1
4. Press CONVECTION BAKE . “350” will flash in the display prompting to enter a
temperature.
5. Enter a temperature using the numeric pads
0
to
9
.
6. Press START . “00:00” will start flashing in the display prompting to enter a cook time.
7. Enter a cook time using the numeric pads
0
to
9
.
8. Press START . The Multi-Stage indicator will now display the 2nd stage.
Stage 2
9. Press BROIL . “550” will start flashing in the display prompting to enter a temperature.
10. Enter a temperature using the numeric pads
0
to
9
.
11. Press START . “00:00” will start flashing in the display prompting to enter a cook time.
12. Enter a cook time using the numeric pads
0
to
9
.
13. Press START . The Multi-Stage indicator will now display the 3rd stage. If a third stage
is not needed, press START a second time. This will start the cooking sequence.
Read next page for stage 3 and canceling details

Table of Contents

Related product manuals