30/38
5-10 ADJUST THE MICROSWICTH S3 :
Adjustment of the micro switch S3
Composition of the kit 0D7003 :
- 1 micro switch support
- 4 washers M4
- 2 screws M4
List of tools necessary to repair
- Screwdriver with Torx T20 socket
- Ratchet handle with M 7 socket
- Screwdriver for M3
- Wrench 7mm or socket 7mm
- Multi meter with a BIP function for continuity and 2 holders
- Adhesive tape
- Steel Rule or equivalent
To Next Page
Loading...
