EasyManua.ls Logo

Electrolux ICON Professional E30GF74HPS - Self-Cleaning Cycle Troubleshooting; Self-Clean Cycle Failures; Normal Oven Smoke During Cleaning

Electrolux ICON Professional E30GF74HPS
36 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
35
Solutions to Common Problems
SELF-CLEANING CYCLE DOES NOT WORK
Make sure the oven door is closed.
Make sure the two oven rack ladders are removed from the oven.
Controls not set properly. Follow instructions.
Self-cleaning cycle was interrupted. Start a clean again, wait 20 seconds for the Lock
light to stop flashing, turn off the clean and wait again 20 seconds for the light to turn off.
SOIL NOT COMPLETELY REMOVED AFTER SELF-
CLEANING CYCLE IS COMPLETED
Failure to hand clean oven frame and door liner outside the oven door gasket before
starting the self-clean cycle. Hand clean burned on residue with a stiff nylon brush and
water or a nylon scrubber. Do not clean the oven door gasket or it will be damaged.
FLAMES INSIDE OVEN OR SMOKE FROM VENT
Excessive spillovers in oven. This is normal, especially for high oven temperatures, pie
spillovers or for large amounts of grease on bottom of oven. Wipe up excessive
spillovers.

Table of Contents

Related product manuals