Electrolux KEAF7200L User Manual

6. SETTINGS
6.1 Programme selection mode
and user mode
When the appliance is in programme
selection mode it is possible to set a
programme and to enter user mode.
Settings available in the user mode:
• The level of water softener according
to the water hardness.
• Activation or deactivation of the rinse
aid empty notification.
• Activation or deactivation of the
acoustic signal for the end of a
programme.
• Activation or deactivation of the
AirDry.
As the appliance stores the saved
settings, there is no need to configure
it before every cycle.
How to set the programme
selection mode
The appliance is in programme selection
mode when the programme indicator
flashes.
After activation, the appliance is in
programme selection mode by default. If
not, set the programme selection mode
the following way:
Press and hold the on/off button until the
appliance is in programme selection
mode.
How to enter user mode
Make sure the appliance is in
programme selection mode.
To enter the user mode, press and hold
the programme button until the indicator
flashes and the indicators ,
and are on.
6.2 The water softener
The water softener removes minerals
from the water supply, which would have
a negative effect on the washing results
and on the appliance.
The higher the content of these minerals,
the harder your water is. Water hardness
is measured in equivalent scales.
The water softener should be adjusted
according to the hardness of the water in
your area. Your local water authority can
advise you on the hardness of the water
in your area. It is important to set the
right level of the water softener to assure
good washing results.
Water hardness
German de‐
grees (°dH)
French de‐
grees (°fH)
mmol/l Clarke de‐
grees
Water softener
level
47 - 50 84 - 90 8.4 - 9.0 58 - 63 10
43 - 46 76 - 83 7.6 - 8.3 53 - 57 9
37 - 42 65 - 75 6.5 - 7.5 46 - 52 8
29 - 36 51 - 64 5.1 - 6.4 36 - 45 7
23 - 28 40 - 50 4.0 - 5.0 28 - 35 6
19 - 22 33 - 39 3.3 - 3.9 23 - 27
5
1)
15 - 18 26 - 32 2.6 - 3.2 18 - 22 4
11 - 14 19 - 25 1.9 - 2.5 13 - 17 3
4 - 10 7 - 18 0.7 - 1.8 5 - 12 2
ENGLISH 9

Electrolux KEAF7200L Specifications

General

Connected load	1950 W
AC input voltage	220 - 240 V
AC input frequency	50 Hz
Energy efficiency scale	A to G
Water consumption per cycle	9.9 L
Cycle time	227 min
Noise level	49 dB
Drying system	AirDry
AquaStop function	-
Delay start (max)	3 h
Delayed start timer	Yes
Dishwashing programs	90min, 160min 60°C, Eco, Quick 30min 40°C, Rinse
Number of place settings	13 place settings
Number of washing programs	5
Number of temperature settings	3
Feet adjustment	80 mm
Door color	White
Door hinge	Sliding
Water fill	Cold, Hot
Cord length	1.5 m
Control type	Buttons
Product size	Full size (60 cm)
Appliance placement	Fully built-in
Baskets adjustable placement	Upper

Weight and Dimensions

Depth	550 mm
Width	596 mm
Height	818 mm
Installation compartment width	600 mm
Installation compartment height (max)	880 mm
Installation compartment height (min)	820 mm