Electrolux KODDP66X - How to Use: Pyrolytic Cleaning

Step 3 Pull the rear end of the shelf
support away from the side wall
and remove it.
2
1
Step 4 Install the shelf supports in the
opposite sequence.
12.4 How to use: Pyrolytic Cleaning
Clean the oven with Pyrolytic Cleaning.
WARNING!
There is a risk of burns.
CAUTION!
If there are other appliances installed in the same cabinet, do not use them at the
same time as this function. It can cause damage to the oven.
Before the Pyrolytic Cleaning:
Turn off the oven and wait
until it is cold.
Remove all accessories. Clean the oven floor and the in‐
ner door glass with warm water,
a soft cloth and a mild detergent.
Pyrolytic Cleaning
Step 1
Enter menu: Cleaning .
Option Duration
C1 - Light cleaning 1 h
C2 - Normal cleaning 1 h 30 min
C3 - Thorough cleaning 2 h 30 min
Step 2
- press to select the cleaning programme.
Step 3
- press to start the cleaning.
Step 4 After cleaning, turn the knob for the heating functions to the off posi‐
tion.
31/40
CARE AND CLEANING