Electrolux KODEC75X - Page 14

7. Deactivate the appliance.
8. Remove the plug of the core
temperature sensor from the socket.
Remove the dish from the appliance.
If the dish is not cooked to your
satisfaction, do the above steps again
and set a higher core temperature.
You can change the temperature at any
time during the cooking. Press to
change the set core temperature.
WARNING!
Be careful when you remove
the tip and plug of the core
temperature sensor. The
core temperature sensor is
hot. There is a risk of burns.
8.2 Inserting accessories
A small indentation at the top increases
safety. The indentations are also anti-tip
devices. The high rim around the shelf
prevents cookware from slipping of the
shelf.
Wire shelf:
Push the shelf between the guide
bars of the shelf support.
Baking tray / Deep pan:
Push the tray between the guide bars
of the shelf support.
Wire shelf, Baking tray / Deep pan:
Push the tray between the guide bars
of the shelf support and the wire shelf
on the guide bars above.
www.electrolux.com14