Electrolux KODEC75X - Page 34

Step 1 Step 2 Step 3
Pour: 250 ml of white vine‐
gar into the cavity emboss‐
ment. Use maximum 6%
vinegar without any addi‐
tives.
Let the vinegar dissolve
the limestone residue at
the ambient temperature
for 30 minutes.
Clean the cavity with warm
water and a soft cloth.
For the function: True Fan Cooking PLUS clean the oven for every 5 - 10 cooking
cycles.
11.3 How to remove: Shelf
supports
Remove the shelf supports to clean the
oven.
Step 1 Turn off the oven and wait
until it is cold.
Step 2 Pull the front of the shelf
support away from the side
wall.
Step 3 Pull the rear end of the shelf
support away from the side
wall and remove it.
2
1
Step 4 Install the shelf supports in
the opposite sequence.
The retaining pins on the
telescopic runners must
point to the front.
11.4 How to use: Catalytic
cleaning
The cavity is coated with catalytic
enamel. It absorbs fat during catalysis.
Spots or discolouration of the catalytic
coating have no effect on the cleaning.
Before the catalytic cleaning
Turn off the oven and wait
until it is cold.
Remove all accessories
and removable shelf sup‐
ports.
Clean the oven floor and
the inner door glass with
warm water, soft cloth and
mild detergent.
www.electrolux.com34