What to do if my Electrolux LBU15 does not drain or spin?
If your Electrolux Washer isn't draining or spinning, check the drain hose to ensure it's placed at a maximum height of 140 cm. Make sure the end of the drain hose isn't submerged in water within the laundry sink. Verify that the lid of the washing machine is fully closed. Also, inspect the drain hose for any folds or strangulation, and unfold or clean it as needed.
What to do if the lid of my Electrolux LBU15 Washer does not open?
If the lid of your Electrolux Washer won't open, it's likely due to the safety lock being engaged during the spinning step. Wait a few minutes for the lid to release; refer to page 2 for more information.
How to fix Electrolux Washer when water does not enter?
If water isn't entering your Electrolux Washer, start by checking if the faucet is fully open. Next, examine the filter in the inlet hose for any clogs and clean it if necessary. If no water is coming out of the faucet, inspect your residence's hydraulic system. Ensure that the inlet hose isn't folded or strangled; unfold or clear it to allow water flow. Also, verify that you are using the correct voltage for your washing machine.
How to reduce vibration and noises from Electrolux LBU15 Washer?
Excessive vibration or noises from your Electrolux Washer can stem from a few reasons. Ensure the washing machine is leveled and the floor beneath it is even. Check that the machine isn't touching any walls or furniture. Make sure clothes are evenly distributed inside the drum and not wrapped around the agitator. Also, verify that all packaging parts have been removed from the appliance. Note that some noise during spin cycles is normal, as the drain pump activates, and occasional noise may occur at the start of a spin due to contact between the tank and the inside of the machine; this shouldn't affect operation.
Why does softener or bleach come out early in my Electrolux LBU15 Washer?
If softener or bleach is dispensing too early in your Electrolux Washer, it's likely because the maximum fill level in the dispenser was exceeded. Avoid filling past the maximum level indicated.
What to do if the softener does not exit from Electrolux LBU15?
If the softener is not dispensing from your Electrolux Washer, the softener might be too dense. Try diluting it with a little water.
Why is there lint on clothes after washing in my Electrolux LBU15 Washer?
If you notice lint on your clothes after washing in your Electrolux Washer, it could be due to mixing different fabric types. Separate your clothes according to the program table on the panel or follow the provided Tips and Advice. Another cause could be a dirty lint filter, so be sure to clean it.
Why do clothes get stained after washing in Electrolux LBU15 Washer?
If your clothes are getting stained after washing in your Electrolux Washer, it might be due to using too much softener or soap; refer to page 7 for recommended quantities. Dirty water could also be the culprit, so consider installing a filter in the faucet. Ensure you've performed an internal cleaning of the washing machine as recommended. Staining can also occur if different fabric types and colors are mixed, so separate clothes accordingly, following the provided Tips and Advices. Finally, check the clothing labels to ensure the items are suitable for machine washing, referencing the International Symbols on page 16 if needed.
General| Brand | Electrolux |
|---|---|
| Model | LBU15 |
| Category | Washer |
| Language | English |
Safety advice for children, including keeping packaging away and not allowing operation by kids.
Safety guidelines for users and installers, addressing disabilities and supervision.
Explanation of the automatic safety lock on the lid during spin and drain cycles.
Mandatory installation of an exclusive circuit breaker for the washing machine.
Importance of a properly grounded electrical socket for safety and performance.
Correctly attaching the water inlet hose to the faucet and checking for leaks.
Proper positioning of the drain hose for effective water drainage and preventing backflow.
Selecting wash programs using the dial and activating various washing options.
Solutions for issues where the washing machine does not operate at all.
Troubleshooting problems related to draining or spinning cycles not functioning correctly.
To Next Page