2. Place the handle in position
according to the picture. Use Phillips
screwdriver to fix the handle base to
the lid.
3. Take out the handle cover from the
plastic bag. To avoid installing the
handle cover upside down check the
cover direction before installation.
4. Push the cover to the front side of the
handle base.
5. Some models are equipped with the
lock. To install the lock hook take out
the lock hook and 2 pieces of
roundhead screws from the plastic
bag. Use a Phillips screwdriver to
assembly the lock hook to the front
side of the appliance.
Open and close the lid several times to
make sure the handle is properly
fastened.
www.electrolux.com8
To Next Page
Loading...
