Main components and accessories
Using
• Remove all labels and protective lms prior to use.
• Before ironing your clothes or fabric for the rst time, it is recommended that you heat
the iron and use it on a damp piece of cloth for a few minutes. This will ensure that any
residue left over from the manufacturing process is burnt o the ceramic soleplate and
won’t transfer to your clothes.
• You may notice a slight odor and some steam coming out of the iron when using it for
the rst time. This is normal and should disappear quickly.
1.Front cover
2.Nozzle
3.Water inlet cover
4.Steam burst
5.Spray button
6.Steam push button
7.Upper handle
8.Temperature
9.Conduit
10.Rear cover
11.Lower handle
12.Lamp
13.Water tank
14.Cleaning button
15.Decoration board
16.Skirt
17.soleplate
To Next Page
Loading...
Need help?
General
