OPERATION INSTRUCTIONS
TO TURN ON THE APPLIANCE
Plug in the appliance and tap (touch and release)
the "
" button to turn it on.
NOTE: It will take about 10 seconds for the sensor
to analyze the air quality, during this time the
Loading LED and the Air quality light will pulsate
slowly in white. Each time the appliance is turned
on the SMART mode is activated automatically
and the fan runs in low speed until the air quality
9
analysis is complete.
SMART MODE
About the Air quality light
MANUAL MODE
The appliance has an air quality sensor that
analyzes the air quality.
The air quality light will show the real-time air
quality through dierent colors of light. As shown
below:
NOTE: It will take about 10 seconds for the sensor
to analyze the air quality each time the appliance
is turned on. During this time, the air quality light
will pulsate slowly in white.
Very high humidity conditions in the room might
produce condensation in the sensors. This could
aect the accuracy of the sensor readings.
In this mode, the appliance will choose the fan
speed automatically, based on the air quality level.
This is the default mode each time the appliance
is turned on.
NOTE: In "SMART" mode the fan speed cannot be
changed manually.
Tap the “MODE” button to switch the appliance to
“MANUAL” mode. In this mode, the fan speed can
be changed manually by touching the Fan speed
slider.
NOTE: The fan speed will change gradually after a
new fan speed is selected.
10
11
12
LIGHT'S COLOR
Green
Yellow
Orange
Red
Purple
Maroon
PM 2.5 (μg/m
3
) AIR QUALITY
0-11 Good
12-34 Moderate
35-54
Unhealthy for
Sensitive Groups
55-149 Unhealthy
150-249 Very Unhealthy
>250 Hazardous
8 www.electrolux.com
WIFI FUNCTION
13 This appliance is equipped with a WiFi module,
which you can access to the full functionality of
the system via our smartphone app. Download our
app and follow the instructions for how to connect
it with your appliance. When the connection is
stablished, the WiFi indicator will light up.
CHILD LOCK FUNCTION
The Child lock can be activated and deactivated
by long pressing the On/O and the Mode button
simultaneously for 4 seconds. This function can
also be activated or deactivated via the app.
When the Child lock is activated, the control panel
of the appliance cannot be interacted with and
the Child lock indicator light up.
14
FILTER CHANGE INDICATOR
IONIZER FUNCTION
SCHEDULE FUNCTION
CARE AND CLEANING
The lter change indicator will light up to remind
you to change the lter. Refer to the instructions
in the app or the Electrolux website on
where to purchase replacement lters. Ensure
the plastic protective bag is removed from the
replacement lter before use. After the lter is
replaced, the lter change indicator will turn o
automatically.
NOTE: The HEPA Filter cannot be washed, it can
only be replaced.
The ionizer function can only be activated and
deactivated by using the app (smartphone
application). When this function is activated,
the ionizer indicator lights up and the appliance
generates ions to improve the unit's performance
and with it the room’s air quality.
In the app (smart phone application) you
can set dierent schedules, for example that the
fan speed goes down during night time and then
goes back to normal speed during day time.
The plastic parts of the appliance may be cleaned
with an oil-free dry cloth or by using a vacuum
cleaner with a soft brush.
The fabric on the appliance cannot be removed.
Clean the fabric by using an oil-free dry cloth or a
vacuum cleaner with a soft brush.
Unplug the appliance before cleaning to prevent
shock or re hazards.
15
16
17
18
To Next Page
Loading...
