Electrolux Range - 4.6 Display of hot plates; 4.7 Set value transmitter (hot plates)

- 11 -
TSE-N 01.01 A. B. 599 50 93 79 EN
1 = 5 V
Fig. Set value transmitter (function and temperature)
Fig. Temperature controller
4.6 Display of hot plates
Fig. Display of hot plates
These components accommodate the LED to display the cooking levels set at the 4 hot plates.
4.7 Set value transmitter (hot plates)
At the set value transmitter, each angular degree of switch turning changes an existing voltage
value and/or resistance value. Thus turning the switch results in a change of the existing
temperature at the heater. Control is via the power board.