12. Troubleshooting
12
23
438 9152-11/03
04.03
Service
Manual
NOT DRAINED
The water level exceeds EMPTY at wash program start.
Try to restart the machine (i.e. reset the error code) by pressing START. If
the error returns, first verify these items:
• Is the drain is blocked by fluff or foam?
• Are the the level hose and air box blocked (blow into the level hose)?
• For machines with a drain pump, verify correction operation.
• Does water run out when the power switch on the machine is switched
off?
• Verify the operation of the drain using the service programme.
• Is the drain in the room capable of receiving the water from the
machine?
To Next Page
Loading...
Need help?
General
