Electrolux W375H - Page 112

Service
Manual
23
23. Programme unit
26
438 9145-41/03
03.11
Water reduction not allowed
If the weight measurement function is installed, the
water level will be reduced automatically if the
machine does not have a full load.
Here you determine whether it will be possible to
switch off the water level reduction during a wash
program, using the function "WATER REDUCTION
NOT ALLOWED".
If you answer Yes (Y):
The function "WATER REDUCTION NOT
ALLOWED" can be used.
If you answer No (N):
The function "WATER REDUCTION NOT
ALLOWED" cannot be used.
ADJUST TIME ALLOWED Y
ADJUST TEMPERATURE ALLOWED Y
RAPID ADVANCE ALLOWED Y
SHOW WEIGHT ALLOWED Y
WATER REDUCTION NOT ALLOWED Y
MANUAL FUNCTIONS ALLOWED Y
PAUSE ALLOWED Y
FREE TEXT ALLOWED Y
CHANGE WASH PROGRAM ALLOWED Y
AUTO RESTART ALLOWED Y
ADJUST SPIN SPEED ALLOWED. Y
DISPLAY REMAINING TIME Y
DISPLAY ACTUAL TEMPERATURE Y
DISPLAY ACTUAL SPEED Y
MACHINE NOT HEATED N
Y/N
For machines with weight measurement installed
only!
Answer Yes (Y) or No (N).
Press b.
Y/N
Answer Yes (Y) or No (N).
Press .
ADJUST TIME ALLOWED Y
ADJUST TEMPERATURE ALLOWED Y
RAPID ADVANCE ALLOWED Y
SHOW WEIGHT ALLOWED Y
WATER REDUCTION NOT ALLOWED Y
MANUAL FUNCTIONS ALLOWED Y
PAUSE ALLOWED Y
FREE TEXT ALLOWED Y
CHANGE WASH PROGRAM ALLOWED Y
AUTO RESTART ALLOWED Y
ADJUST SPIN SPEED ALLOWED. Y
DISPLAY REMAINING TIME Y
DISPLAY ACTUAL TEMPERATURE Y
DISPLAY ACTUAL SPEED Y
MACHINE NOT HEATED N
If you answer Yes (Y):
These manual functions will be allowed.
If you answer No (N):
These manual functions will
not be allowed.
Manual functions allowed
Here you determine whether it will be possible to
use certain functions manually during the wash
program:
• Control water valves and drain valve
• Determine the highest extraction speed allowed
• Motor action after program end
• Control detergent valves
PROGRAM STEP: MAIN WASH 1
STEP TIME: 720 SEC
SET TEMPERATURE: 85 °C
ACTUAL TEMPERATURE: 21 °C
REMAINING TIME: 70 MIN
DRUM SPEED: 48 RPM
PAUSE
MANUAL FUNCTIONS
SELECT
991 NORMAL 95°C STD