10
ATTACHING SLIDE-HOUSING TO REFRIGERATOR DOORS
1. Ensure slide-housing is positioned squarely as shown.
2. Ensure that the slide-housing is positioned on the door
as shown in the diagrams.
Note: The slide-housing ‘protruding edge’ side must always
be c
losest to the door handle side (diagram right).
...and secure with tape.
two door single door
70mm
235mm
70mm
70mm
235mm
2 door bottom freezer 2 door top freezer single door
235mm
360mm
235mm
slide housing
door handle
Slide housing (Curve door version)
Slide housing (Flat door version)
70mm
protruding edge
70
mm
To Next Page
Loading...
