10
Cleaning / ᅯ/ ౩ࢸ
Cleaning the brush roll / ๐༬ഝᅯ/ ༹ஈၮ
To remove thicker threads or wires as well as
on models that are not equipped with the
BRUSHROLLCLEAN™, the brush should be cleaned
according to the following instructions.
2. Lift out the brush roll and clean it. Use a sharp
object to remove threads. Reassemble the roll,
making sure it can spin freely. Close hatch cover.
1. First turn Ergorapido o. Push the brush roll
release button. The hatch cover will come slightly
free and the brush roll can be removed.
Cleaning the hose and wheels / ጭ༺ෟልᅯ/ ༹ஈྟൔ
1. Loosen the catch and pull the hose from the
attachment. Remove any debris. Put the hose back,
lock using the catch.
2. If the wheels needs to be cleaned, remove them
carefully by using a small screwdriver.
3. Remove objects that may have become jammed
in the wheel shafts. Reassemble the wheels by
pressing them back into their tracks.
BRUSHROLLCLEAN™ ၦၿᅎ࿌ၰხྨၔකసၕ
ዅጀዻଞဪཇၦဉၦ࿌႞ዻඓ
๐༬ఋၗ႗ᅍಋೡᅯጁఁఋ
2.
๐༬ഝၕ౹࿌ᅯጁఁఋஃᆽചဪ
මᅰຫဧዻཇၕ႞ጁఁఋഝၦ
ၴ၉ടፂ႖ዾ༘ၰഛႁႮ൝ጁఁఋጄᆳ
ᇑఏཀఁఋ
1. ൿ႔-ZOWZIXQLWၡ႖ဴၕ୲ఁఋ૯౪
๐༬ഝጄ႞ቾၕఁఋጄᆳᇑ
྾൘ඓ๐༬ഝၕ༘ၰཀఁఋ
1.
ઃ༊ዘ౪႞ዜิᅎ࿌ၰ௴ጭ༺
ၼྤఙଁఁఋၦමჲၕ႞ጁఁఋጭ༺
ఋགྷபધઃ༊ઃ࿌ၻఁఋ
2. ልᅯዻඓၵၔೡၦചል
ၡዻஔఁఋ
3. ልᆔ୶ၰ௴මᅰၰఋඓ႞ጁఁఋ
ቼ೮ልఋགྷபၒඓ
ႁႮ൝ጁఁఋ
းಇԩ༒ڿ֬ࢧՠནࠎࣈඒරƗઉ༒Ӫఝ֬ྟ
ރڕႼBRUSHROLLCLEAN™ ܆Ɨ႒φᅽၢ
༶නଃ౩ࢸඞè
2. ሶ౯߲ၮ݀ቲ༹ஈăൗႯ༅฿ಇԩ༒
ڿ֬ནèࢃඞݕሔߴჷ໑ƗѰಙಱఊሸႵሎ
èލഏඞݕۉè
1. ၅ሌܕErgorapidoăφ༶ඞݕ൫٩φ୭èඞ
ݕۉຸຸ߽ළƗՕ൏ၢಃԢඞݕè
1. ႕ఎఌిѰࢃܼ՝ৼࢫሔᇉᇖটԢè౩ԩ
ܘèሔߴܼѰ෴࣌è
2. ྙኊገ༹ஈൔLjൗႯཱིރઋරཱི֞ྖಃ༶ݖ
è
3. ༹߹ൔᒷభถᐆ߅ᔜྭࡼᇕᄏèݝφࢃݖ
ሔߴݖҩè