Electronics Worldwide EASYFIND - User Manual

Camping Satellite System Quick Start Guide
Dish Set UP
1. Assemble the dish as per instructions enclosed with feed arm contents in the brown box.
- For camping case system choose mounting method of choice
- For tripod mounted systems open out Tripod and push on tripod head (do not tighten thumb
screws at this stage)
2. Fix Dish to Tripod head using U clamp in feed arm box
3. Set dish elevation to 26°.
To do this loosen the wing
nut on the dish bracket
and slide up or down until the
notch is set pointing at 26°.
Try to be as accurate as possible.
4. Skew LNB 15° anti-clockwise from behind the dish. To do this stand behind the
dish so you are lookingat the yellow end cap, now line up the third marking to the
right of the centre triangle to 12 o’clock. Try to be as accurate as possible.
5. The dish face should be at roughly 90° to the ground and the cable from the LNB should be pointing to the
ground (LNB feed arm should be angled at 26° to the ground). Find a position for the dish with no trees or
obstructions when the dish and LNB are pointing at 145° (SE)
Congratulations on your new purchase and welcome to the world of “EASYFIND” Satellite TV, the simpleist system
to set up and operate. Everything you need to watch Free To Air satellite TV is included in this system apart from
the TV!
This guide will take you through the simple process required to get you watching all your favourite channels as
soon as possible.
Yellow End Cap
Center Triangle Marking
Third Line to the right Marking
Wing Nut
Notch
Angle Markings
electronics
WORLDWIDE

Summary

Dish Set UP

Assemble and Mount Dish

Assemble the dish and choose the mounting method for tripod or camping case systems.

Set Dish Elevation and Skew

Set dish elevation to 26° and skew LNB 15° anti-clockwise using markings.

Dish Face and Cable Orientation

Position dish face at 90° to ground, cable pointing to ground, aiming 145° (SE).

Lead Connection

Connect Cables and Power

Connect TV, receiver, LNB, and power leads, then switch on the equipment.

Select AV Input Channel

Select the correct AV input channel on your TV to display the receiver output.

Tuning in the System

Access Menu and Set Language

Press 'menu' on the remote, then navigate and select 'English' language.

Navigate to No Signal Screen

Press 'Exit' repeatedly until the 'no signal' screen is displayed on the TV.

Select Easy Find Digital Option

Press 'OK' and use arrow keys to select the 'easy find digital' tuning option.

Select Satellite and Check Signal

Select 'Astra 28*E' and check signal intensity and quality for optimal reception.

Activate Easy-Find LNB and LED

Push 'info' to activate the Easy-Find LNB; the LED should illuminate RED.

Align Dish Using LED Color

Move the dish slowly to change the LED color from RED to AMBER, then to GREEN.

Final Signal Verification

Re-check signal strength and quality, ensuring no obstructions are present.

Troubleshooting Checklist

Verify LNB skew, elevation, connections, and check for obstructions or correct TV input.

Electronics Worldwide EASYFIND Specifications

General

Brand	Electronics Worldwide
Model	EASYFIND
Category	Satellite TV System
Language	English