Eleglide M1 - Install The Steering Bar; Install The Front Light; Install The Pedals

05
EN
Step 3 Install The Steering Bar
A) Undo the handlebar clamp bolts to open the clamp.
B) Place the handlebar and make sure the clamp is in the middle of the handlebar. (The brake levers
should be in front of the grips.)
C) Tighten up the clamp bolts to lock the clamp.
Pedal Left Right
Step 5 Install The Pedals
Step 4 Install The Front Light
A) Place the front light with the fork brace.
B) Secure the light by tightening up the bolt.
×
√