Eleglide M1 - Install The Seat; Install The Battery; Install The Reflectors; Turn The Power on

06
EN
Step 6 Install The Seat
A) Put the seat post into the support frame.
B) Adjust the seat to a suitable height and fix it by locking the quick-release clip.
Step 7 Install The Battery
A) Put the battery in the right position and unlock the battery before you use it.
Step 8 Install The Reflectors
Step 9 Turn The Power on
A) Put the battery in the right position and unlock the battery before you use it.
B) Press the On/off button on the control panel to turn the power on. Then it’s ready to go!