Eleglide M1 - User Manual

Questions and Answers

P
Pamela FloresAug 6, 2025
What to do if my Eleglide Bicycle display fails to work?
- J
  jonathanrichardsAug 6, 2025
  If your Eleglide Bicycle's display isn't working or the vehicle won’t turn on, it could be due to several reasons. First, ensure the battery has power by charging it. Next, check that the electric wire is properly and tightly connected. If these steps don't resolve the issue, the display might be damaged, or the controller may have burned out or sustained water damage, and you should contact the re-seller for help.
J
jimenezmonicaAug 12, 2025
What to do if my Eleglide M1 Bicycle battery fails to charge?
- K
  karenmillerAug 12, 2025
  If the battery of your Eleglide Bicycle fails to charge, first ensure that the charger is properly plugged in and try charging it again. If that doesn’t work, it could be due to the battery being outside of the recommended temperature range, so charge it at a proper temperature. Also, make sure the battery is charged under rated voltage. If the issue persists, the battery may be damaged, and you should contact the re-seller.
J
Joseph BarnettAug 17, 2025
Why is the riding distance insufficient on my Eleglide M1 Bicycle?
- S
  Shelly LeeAug 18, 2025
  If you're experiencing insufficient riding distance on your Eleglide Bicycle, there are a few potential causes. Ensure the battery is fully charged. Also, check the tire pressure before each use. Frequent braking can also reduce riding distance, so develop good riding habits. Finally, keep in mind that battery aging, battery capacity attenuation, and low ambient temperature are normal factors that can affect riding distance.
X
xdaltonAug 25, 2025
Why does the motor fail to work on my Eleglide M1 Bicycle?
- A
  Alexander GriffithAug 25, 2025
  If the motor on your Eleglide Bicycle fails to work, it might be because the brake lever isn’t backing properly, so try adjusting it. Another possibility is that the electric wire isn’t plugged in properly; ensure it is securely connected. If neither of these fixes the issue, the sensor or controller might be inefficient, and you should contact the re-seller for assistance.
T
Todd HuynhAug 30, 2025
How to fix the front light on my Eleglide Bicycle?
- J
  Joseph SaundersAug 30, 2025
  If the front light on your Eleglide Bicycle isn't working, first check that the wire is plugged in properly. If it still doesn't work, the light may be damaged, and you should contact the re-seller.

Summary

Note and Warnings

Important Notes for First Use

Guidance on understanding the e-bike, safe riding practices, and legal requirements.

Safety Warnings Before Riding

Critical safety checks for charging, tires, handlebars, and reflectors.

Product Diagram and Specifications

E-bike Component Diagram

Labeled illustration identifying key parts of the Eleglide e-bike.

Eleglide Model Specifications

Detailed technical specifications for M1 and M1 Plus models.

Assembly Guide

Install The Front Wheel

Guide for installing the front wheel onto the bicycle frame.

Adjust The Stem

Instructions for adjusting the bicycle's stem alignment and tightness.

Install The Steering Bar

Procedure for installing the handlebar onto the stem.

Install The Front Light

Steps to securely mount the front light to the fork brace.

Install The Pedals

Guide on correctly attaching the left and right pedals to the crank arms.

Install The Seat

Instructions for inserting and adjusting the seat post and saddle.

Install The Battery

Procedure for placing the battery into its designated position.

Install The Reflectors

Guidance on fitting the reflectors onto the bicycle.

Turn The Power on

Steps to power on the e-bike by activating the control panel.

Display Guides

LED Display Overview

Explanation of LED indicators for power, battery, speed modes, and lights.

LCD Display Contents

Overview of information displayed on the LCD screen.

LCD Functions and Operations

Details on how to operate the LCD display and bicycle functions.

Shifting Speed Modes

Guide on changing between the five available speed assist modes.

Setting 6 km;h Push Mode

Instructions for activating and using the 6km/h push mode.

Accessing More Information

How to cycle through different data displays like ODO, TRIP, VOL, TIME.

Activating Advanced Settings

Steps to access and adjust advanced settings like backlight and units.

Maintenance and Troubleshooting

E-bike Cleaning Procedures

Proper methods for cleaning the e-bike mainframe and components.

Storage Guidelines

Guidelines for storing the bicycle and its lithium-ion battery.

Other Parts Maintenance

Maintenance recommendations for various bicycle components like brakes, tires, and chain.

Troubleshooting Common Issues

Solutions for common problems like display failure, charging issues, and motor problems.

Warranty Information

Warranty Process

Steps and requirements for submitting a warranty claim.

Valid Proof of Purchase

Information on what constitutes valid proof for warranty claims.

Eleglide M1 Specifications

General

Motor Power	250W
Max Speed	25 km/h
Suspension Type	Front Suspension
Charging Time	4-6 hours
Max Load	120kg
Range	50-80 km
Frame Material	Aluminum
Brakes	Disc Brakes
Range (assisted)	50-80 km
Display	LCD