ELEKTROBOCK BT710 - Page 8

8
-
+
MENU
-
+
MENU
-
+
MENU
-
+
MENU
Send a signal to the
receiver by pushing the
button.
Both LEDs turn on simultaneously several times and the output
relay turns on and off multiple times.
“rest On / test Off” appears alternately on the display of
thermostat.
Wait for about 10 s for the synchronization to fi nish.
NOW THE 1. RECEIVER IS PAIRED.
Push the
MENU
button long 2x to
return to the basic view.
LED1 LED2
To return to the basic view, press long 2x
MENU
button.
Shortly push the FUNCTION
button on the second receiver
for about 1 s, after which both
diodes will start fl ashing.
Send a signal to the second receiver by pushing the
button.
Push the
button
1x and “tESt 2-”
appears on the
display.
Do you wish to pair
a 2nd receiver
with this transmitter?
NO
YES
F
H
G
Receiver
If the Ertr (communication error) message appears on the display, the learning process was
not carried out correctly and the whole procedure has to be repeated.
!