To Next Page
S
Sonya RomeroSep 9, 2025
What to do if BT-Connection fails on ElektroPhysik Measuring Instruments?
- Llisa88Sep 9, 2025
If the BT-Connection fails on your ElektroPhysik Measuring Instruments, carry out a total reset.
What to do if BT-Connection fails on ElektroPhysik Measuring Instruments?
If the BT-Connection fails on your ElektroPhysik Measuring Instruments, carry out a total reset.
What to do if CALIBRATION FAILS on ElektroPhysik Measuring Instruments?
If CALIBRATION FAILS on your ElektroPhysik Measuring Instruments, carry out a total reset.
What to do if the SD Card is FAULTY in ElektroPhysik Measuring Instruments?
If the SD Card is FAULTY in your ElektroPhysik Measuring Instruments, carry out a total reset.
What to do if there is a FILE ERROR on ElektroPhysik Measuring Instruments?
If there is a FILE ERROR on your ElektroPhysik Measuring Instruments, carry out a total reset.
General| Display | LCD |
|---|---|
| Interface | USB |
| Technology | Magnetic induction |
| Substrates | Steel, non-ferrous metals |
| Accuracy (N) | ±(3% of reading + 2 μm) / ±(3% of reading + 0.08 mils) |
| Resolution | 0.1 μm |
| Data storage | 1000 measurements |
| Power Supply | Rechargeable battery |
| Operating Temperature | 0°C to 50°C |
| Storage Temperature | -20°C to 60°C |
| Probe Types | Standard and special probes |
Step-by-step guide for battery installation and sensor connection.
Basic gauge operation, including power on and taking readings.
Details the gauge's general features, front panel layout, and keys.
Important notes, basic settings, and interpretation of readings.
Procedures for taking readings and managing measurement errors.
General notes, calibration methods overview, and rough surface calibration.
Calibration steps for N10, N20, N100, F20, F50, and tube sensors.
Detailed technical specifications for gauges and various sensors.
Comprehensive list of error codes and their solutions.
