Elemer RMT 49D - Completeness

7
3.25. Electric resistance of conductor line isolation of RMT circuits concerning its case and is
not less:
- 20 М Оhm at the surrounding air temperature of (20
±
5) С, and at the relative humidity
from 30 up to 80 %;
- 5 М Ohm at the surrounding air temperature of (40
±
3)С and at the relative humidity
from 30 up to 80 %.
3.26. Chart tape:
Useful width - 100 mm, length of record - 80 mm.
3.27. The speed of moving of the diagram is chosen out from a rang: 0, 10, 20, 60, 120, 240,
600, 1200, 3600, 7200, 14400 mm / hour.
3.28. Overall dimension, mm, no more:
- Forward panel 144х144;
- Assembly depth 250;
- Cut in a board 139х139.
3.29. RMT weight is not more than 4 kg.
3.30. RMTs are resistant to the effect of surrounding air temperature from +5 up to +40С.
3.31. RMTs are resistant to effect of humidity up to 90 % at the temperature of 25С.
3.32. RMTs in transport packing withstand the temperature up to +50С.
3.33. RMTs in transport packing withstand the temperature down to –50С.
3.34. RMTs in transport packing withstand the environment air influence with relative
humidity of 98 % at the temperature of 35С.
3.35. RMT in transportation packing are stable against effect of shock jolting with number of
impacts per one minute - 80, with average quadratic acceleration rate of 98 м/с2 and during 1
hour.
4. COMPLETENESS
4.1. A complete set of delivery includes:
- multichannel technological registrar RMT 49D - 1 pieces;
- corresponding part of a socket DB9 - 1 pieces;
- diskette with the software (on RMT group) - 2 pieces;
- Key for the door - 1 pieces;
- Complete set of writing pen units such as ZP 410- ZP 430 - 1 pieces;
- Fixing bracket - 2 pieces;
- Rolled paper - 8 pieces;
- multichannel technological registrars RMT 49D. The passport - 1 pieces.