Complies with applicable parts in Pressure Equipment
Directive 97/23/EC Module A1. Eletta approved by notified
body Det Norske Veritas with approval number: 0409.
The certificates issued, which will be sent to you upon request
or they can also be found to download on www.eletta.com.
Explosion
Proof: The Flow Monitor itself is not approved as a complete instru-
ment according to EU Hazardous Area EX-regulations.
CE-
approvals: The Eletta Flow Monitors conforms with the EU directive for
low voltage no: 2014/35/EU. We refer to the certificates
issued, which will be sent to you upon request. They are also
available at www.eletta.com.
PED-
Directive:
Complies with applicable parts in Pressure Equipment Directive
2014/68/EU. Conformity assessment has been performed
according to module A. Internal production control combined
with module A2. Internal manufacturing checks with
monitoring of the final assessment, for category 2. Performed
by Kiwa Inspecta AB. PED Declaration of conformity will be
sent to you upon request and are also available on
www.eletta.com.
Approvals: The micro switches, cables and terminal blocks are approved
according to CSA and UL.
To Next Page
Loading...
Need help?
General
