Elfa BLDF98 - Programmer Advanced Modes; Automatic Use with Start;End Times; Minutes Counter and Sound Signals

When the cooking end time corresponds to the time of day , the relay and the cooking time symbol
switch off. When the cooking time is up. The AUTO symbol flashes, the sound singal rings and
both the relay and the cooking time button switch off.
Automatic use with cooking time and end time setting
Press the cooking time button and select the length of the cooking time with +or –button. The
AUTO and cooking time symbols light up continuously. The relay switches on. By pressing the
cooking end time button the next cooking end time appears on the display. Set the cooking end
time with +button. The relay and the cooking time symbol switch off .the symbol lights up again
when the time of day corresponds to the cooking start time. When the cooking time is up, the
AUTO symbol flashes, the sound signal rings, the cooking time symbol and the relay switch off
Minutes counter
Press the minutes counter button and set the cooking time with +or –button.
The bell symbol lights up when the minutes counter is operating, when the set time is up, the
sound rings and the bell symbol switches off.
Sound signal
The sound signal starts at the end of a programmer or of the minutes counter function and it lasts
for 15minutes.
To stop it, push any one of the functions buttons.
Start programme and check
The programmer starts 4seconds after it has been set. The programmer can be checked at any time
by pressing the corresponding button.
Setting error
A setting error is made if the time of day on the clock falls within the cooking start and end times.
To correct the setting error, change the cooking time or cooking end time the relays switch off
when a setting error is made.
Cancelling a setting
To cancel a setting, press the cooking time button and then press the –button until 00 00 appears
on the display. A set programmer will automatically cancel on completion.
Operating instructions for Electronic Timer (3 keys)
1. Functional description-Overview
The operation of this timer is done 3 buttons. The functions of the buttons are: