2.8
General functional description
If you are going to switch on remotely controlled
compressors must ensure that nobody is checking or
working on the compressor at that time. A warning sign
near the equipment’s start button is mandatory.
Wait up to five minutes to ensure that the air in the air-
oil separator tank is released to start routing
maintenance.
Vent all internal pressure prior to opening any line,
fitting, valve, drain plug, connection or other
components such as filters. Vent pressure by popping
up the safety valve.
Display a maintenance chart near the compressor to
easily identify the maintenance intervals of regular
service items.
To Next Page
Loading...
