ELGi EG 22 - 5.0 Installation and operation

5.1
Installation and operation
Contents Page No.
5.1. Installation and commissioning 5.2
5.1.1 Unpacking 5.2
5.1.2 Disposal of packing materials 5.2
5.1.3 Handling the compressor 5.2
5.1.4 Site requirements 5.2
5.1.4.1 Ventilation 5.3
5.1.5 Electricals 5.4
5.1.6 Air pipe dimensions 5.5
5.1.7 Receivers for compressed air systems 5.7
5.1.8 Possible mistakes 5.7
5.1.9 Commissioning procedure 5.7
5.1.10 Oil fill procedure 5.8
5.2. Preservation for long idle storage 5.9
5.2.1 Airend 5.9
5.2.2 Motor 5.9
5.2.3 Air-oil separator tank 5.9
5.2.4 Rubber hoses 5.9
5.3. Operating instructions 5.10
5.3.1 Initial start-up checks 5.10
5.3.2 Initial start-up 5.10
5.3.3 Pre-start checks 5.10
5.3.4 Starting 5.10
5.3.5 During running 5.10
5.3.6 Stopping 5.11
5.3.7 Changing the compressor settings 5.11
Installation and operation 5.0