Elid EL2305D - Save Parameter; Clear Memory

EL2305D Access Control Panel
User Guide
Revision 1.1.20
36
2.8 SAVE PARAMETER
 This command allows you to save all the parameters that you have
programmed in the secondary storage device, which will be retained even
when power supply is switched off.
 Press the <#> Key to confirm.
2.9 CLEAR MEMORY
 This command clears all memory and should be used only when you
suspect corruption of data. All parameters previously programmed in the
memory will be erased and the default factory settings assigned.
 Press the <#> Key to confirm.
Save Memory. . . .
Confirm ( * / # )
Clear Memory. . .
Confirm ( * / # )