What to do if some flash units can’t be triggered with the Elinchrom Receiver when the Mode “Grp” is selected?
If some flash units aren’t triggered with the Elinchrom Receiver while in “Grp” mode, ensure the GROUP selector switch is set to the same group. You might also need to reduce the distance to any “not working” unit.
What to do if the TEST flash works, but the camera does not trigger the Elinchrom flash unit?
If the TEST flash works, but the camera doesn't trigger the Elinchrom flash unit, check the hot-shoe fitting. Alternatively, choose a SYNC cable instead of the hot-shoe connection.
How to troubleshoot Elinchrom Receiver when the Transmitter does not trigger it and Mode “All” is selected?
General| Brand | Elinchrom |
|---|---|
| Model | El-Skyport |
| Category | Transmitter |
| Language | English |
Compliance with portable RF exposure limits in Canada and USA.
Equipment tested and found to comply with FCC limits for digital devices.
Details the capabilities and compatibility of the transmitter with camera hotshoes.
Provides a link to the Elinchrom website for compatible camera models.
Instructions for securely attaching the transmitter to the camera's hotshoe mount.
Instructions for safely removing the transmitter from the camera's hotshoe mount.
Describes the main display layout and elements of the transmitter.
Describes the display during menu navigation and setup.
Details the functions of the four speed buttons for quick parameter adjustments.
Instructions for powering the transmitter and toggling flash groups.
Explains the functions of the test, refresh, rotating dial, and set buttons.
Automatically searches for Elinchrom flash units with EL-Skyport.
Details available frequency channels for El-Skyport units.
Explains Normal and Speed modes for shooting functionality.
Describes Standard, HS Hi-Sync, and Second Curtain synchronization modes.
Improves exposure with HS Sync mode by adjusting flash duration.
Controls modelling lamp, AF assist light, and button feedback.
Enables battery saving by putting the transmitter into sleep or auto-off.
Adjustments for display contrast and backlight illumination.
Solutions for reduced transmission range and interference.
Optimizing HS mode performance and avoiding visible banding.
Resolving issues with finding or missing Elinchrom units.
Link to obtain the complete El-Skyport Transmitter Plus HS user guide.
Find declarations for EC and USA & Canada conformity.
Instructions for downloading and installing the latest firmware.
To Next Page
